
Mechanically control weeds.
AERATE the SOIL.
Control weeds effectively while loosening the soil surface at the same time – without any chemical crop protection products. With the Tined Weeder (AS), you care for your crops mechanically, promote soil aeration, and create optimal conditions for healthy plant development.
Pure precision
with the APV Tined Weeder (AS)
The APV Tined Weeder supports you in effective weed control, breaks up soil crusts, and promotes better soil aeration – for vital crops and gentle treatment of the topmost soil layer.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationControl weeds at an early stage
Fine tines lift young weeds out of the soil or cover them with earth.
Break up soil crust and aerate the soil
The topmost soil layer is loosened, soil aeration is improved, and capillarity is interrupted.
Advantages of the Tined Weeder
How the Tined Weeder works
The tines are arranged in 6 rows with a line spacing of 31.25 mm and are focused on controlling unwanted weeds. The fine tines are arranged in 6 rows and are particularly well suited for weed control. The unwanted plants are lifted out, deposited, and dry out directly on the soil surface.
While weeding, the tines penetrate the soil to a maximum depth of 2–3 cm to break up and crumble the topmost soil crust. This promotes better soil aeration and interrupts capillarity. However, the main task is weed control. In a natural way, 90% of weed seedlings are reduced by being pulled out of the soil and deposited to dry out.

All advantages at a glance

Special features of the tines
Longer wear end
The tines of the APV Tined Weeder have a 20 mm longer wear end – compared to common competitor products – to increase service life.
Increased offset angle
The stronger offset angle also provides an ideal weeding experience. In field test series, the line spacing of 31.25 mm proved to be the best choice, as it achieves a more even working pattern across the entire working width.

Constant pressure
The APV Tined Weeder AS is designed for flat, effective, and even crop care. The technical basis consists of the 6-row tine arrangement, the precise line spacing, and the continuous ground adaptation of the weeding sections via the chain suspension of the weeding sections.
Thanks to individual suspension and lateral compensation of each fork, pressure is applied evenly to the weeding sections even on uneven ground.

Modelle
The APV Tined Weeder AS is available in several working widths – from the compact unit for smaller structures to the powerful variant for high area output. Click on the desired model for more information and technical data.
AS 300

Small, maneuverable, and effective
Working width 3 meters
With a working width of 3 m, the AS 300 is the compact solution for mechanical weed control. The fine tines lift weeds out of the soil and deposit them on the soil surface, where they dry out. This reduces around 90% of weed seedlings without the use of chemicals.
Ideal for smaller fields, diverse farm structures, and operations looking for a compact machine for crop care.
You can find all technical details as well as information on the scope of delivery in the brochure in the Downloads section, or click here.
The Tined Weeder can be combined with various seeders, spreaders, Multi-Metering Systems, and accessories. Take advantage of our free advisory service - together we'll find the perfect configuration, optimally suited to your individual application.
AS 600

More working width for flexible use
Working width 6 meters
The AS 600 offers a working width of 6 m, combining performance with flexible usability. The fine tines lift weeds out of the soil and deposit them on the surface, where they dry out. This allows weed seedlings to be reduced naturally without chemicals.
Ideal for smaller fields, diverse farm structures, and operations looking for a compact machine for crop care.
You can find all technical details as well as information on the scope of delivery in the brochure in the Downloads section, or click here.
The Tined Weeder can be combined with various seeders, spreaders, Multi-Metering Systems, and accessories. Take advantage of our free advisory service - together we'll find the perfect configuration, optimally suited to your individual application.
AS 900

Powerful for larger areas
Working width 9 meters
On the AS 900, 7 mm tines take on the key task. They are arranged in 6 rows and work with a line spacing of 31.25 mm. During the pass, weeds in the thread or germination stage are covered with soil or pulled out and deposited on the surface.
Ideal for larger fields, higher daily output, and operations looking for a powerful solution for mechanical crop care.
You can find all technical details as well as information on the scope of delivery in the brochure in the Downloads section, or click here.
The Tined Weeder can be combined with various seeders, spreaders, Multi-Metering Systems, and accessories. Take advantage of our free advisory service - together we'll find the perfect configuration, optimally suited to your individual application.
AS 1200

Maximum area output
Working width 12 meters
The AS 1200 is the large variant for high performance. Here, too, 7 mm tines work in 6 rows with a line spacing of 31.25 mm. This achieves an even working pattern across the entire working width and effectively controls weeds at an early stage.
Ideal for large areas, contractors, and operations with high demands on daily output and efficiency.
You can find all technical details as well as information on the scope of delivery in the brochure in the Downloads section, or click here.
The Tined Weeder can be combined with various seeders, spreaders, Multi-Metering Systems, and accessories. Take advantage of our free advisory service - together we'll find the perfect configuration, optimally suited to your individual application.
Which model fits?
The right working width depends on the farm structure. Key factors are field size, field length, tractor power, desired daily output, and the planned timing of use. Anyone who also wants to mount a pneumatic seeder should also take weight, superstructure, and deployment strategy into account.
Accessories

With hydraulic tine adjustment, a double-acting hydraulic cylinder is mounted on each weeding section. This allows the tine position to be adjusted while driving.
Hydraulic tine adjustment

Cable sets, extension cables, 7-pin signal cable, hoses, hose extensions, ...
Miscellaneous cable and hose accessories

platform kit for convenient access to the seeder.
Symbol photo
platform kit

Superstructure of a PS-row Pneumatic Seeder with electric or hydraulic fan + Filling Ladder
Pneumatic Seeder

Mounting option for 6 mm, 7 mm, or 8 mm tines
Tine Strength

For safe travel on public roads.
Symbol photo
Warning signs + lighting
Downloads
Technical data are important – but the right configuration is decided in practical use.
Our team supports you with working width, tractor requirements, equipment, and possible combinations, accessories, sensors, and much more.

We will be happy to advise you
personal | fast | straightforward
Do you still have unanswered questions or would you like individual advice from one of our APV product specialists? Please use the form below and we will get back to you promptly. We look forward to speaking with you. See you soon.
Medien
FAQ
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationHow does tine adjustment work?
Basically, the APV Tined Weeder should be set so that it sits horizontally to the soil surface. This, along with the working depth, is primarily adjusted via the support wheels. The Tined Weeder is designed so that, during weeding, the tines work perpendicular to the soil surface, which achieves the best weeding results. The preload force of the tines can now be adjusted via the tine adjustment, which is done mechanically via a lever as standard (optionally hydraulic). Ideally, the weeding work should be checked in the field after a short approach ramp (50–100 m).
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationHow does the folding mechanism work?
Since we rely on gentle folding for the APV Tined Weeder, we install cylinders with adapted stroke length as standard.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationHow does the folding linkage of the forks work?
Road traffic regulations require compliance with a maximum transport width of 3 m. This is achieved thanks to the special folding of the individual weeding sections.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationSupport wheels on the Tined Weeder
Since the support wheels transfer a certain portion of the weeder's weight to the ground, the APV Tined Weeder uses support wheels with an 8-inch wheel diameter. This ensures not only better ease of pulling but also stable lateral guidance.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationLower link catch tabs on the Tined Weeder
To make it easier for farmers to attach the APV Tined Weeder and save additional time, the lower link catch tabs were bent outward. This allows the tractor's lower links to slide into the correct coupling position.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationTined Weeder U-profile
On the APV Tined Weeder, we rely on U-profiles on which the tines are mounted, so that no plants are decapitated when weeding in taller crops. The tine coils are also housed within the U-profile, protecting crop plants from pinching as well.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationTined Weeder plastic bushings
On the APV Tined Weeder, we rely on U-profiles on which the tines are mounted, so that no plants are decapitated when weeding in taller crops. The tine coils are also housed within the U-profile, protecting crop plants from pinching as well.
What is a tined weeder and what is it used for?
The APV Tined Weeder (AS) is used for the mechanical control of weeds in agricultural crops. Its tines work the topmost soil layer, cover or uproot young weeds, and at the same time break up soil crusting. This allows the Tined Weeder to support mechanical, resource-friendly crop care.
How does mechanical weed control with the Tined Weeder work?
During weeding, the tines of the APV Tined Weeder work through the topmost soil layer. Young weeds are pulled out, exposed, or covered with soil. At the same time, the soil surface is loosened. Key factors for a good result include the development stage of the crop and the weeds, as well as soil and weather conditions.
How deep does the APV Tined Weeder work?
The APV Tined Weeder works close to the surface, with a working depth of approximately 2 to 3 cm. This means the topmost soil layer is worked, while the impact on the soil remains comparatively minimal.
Which tines are available for the APV Tined Weeder?
The Tined Weeder (AS) has six tine rows and is available with tines in 6, 7, or 8 mm thickness. This allows the equipment to be selected according to the operating conditions and the desired work intensity. The tines also feature a wear end extended by 20 mm.
What is the effect of the Tined Weeder's narrow line spacing?
The APV Tined Weeder has a line spacing of 31.25 mm. The narrow spacing ensures that the soil surface is worked intensively and evenly by the tines across the entire working width.
How does the Tined Weeder adapt to uneven ground?
Thanks to the suspension and mobility of the weeding sections, the APV Tined Weeder can adapt to uneven ground. The lateral compensation supports even ground adaptation and thus the most consistent possible working result across the entire working width.
What working widths are available for the APV Tined Weeder?
Depending on the model, the APV Tined Weeder is available with working widths of 3, 6, 9, or 12 meters. This provides solutions for different farm sizes, area outputs, and requirements.
What advantages does mechanical weeding offer besides weed control?
In addition to mechanically controlling weeds, the Tined Weeder can break up soil crusting and loosen the topmost soil layer. This combines crop care with near-surface soil tillage in a single pass.
Which operations is the APV Tined Weeder suitable for?
The Tined Weeder is suitable for operations that want to mechanically control weeds and care for their crops near the surface. Thanks to the various working widths and tine thicknesses, the machine can be adapted to different farm sizes and operating conditions.
Das Problem
Weeds can be controlled mechanically with particular success during the thread and germination stage. If this window is missed, competitive pressure within the crop stand increases. The crop plant then has to share water, light, and nutrients with unwanted plants.
Die Lösung
The fine tines of the APV Tined Weeder lift young weeds out of the soil, cover them with earth, or deposit them on the surface. There, they dry out. In this way, around 90% of weed seedlings can be reduced naturally.

Technical data are important – but the right configuration is decided in practical use.
Our team supports you with all important questions regarding your personal needs and requirements for APV agricultural machinery.










